README.md

@@ -0,0 +1,12 @@
+# Raine's Dotfiles
+
+## Crates
+Everything is a crate.  
+If something is distro specific you should follow the following naming scheme:
+`crate.<DISTRO>.sh`
+
+## Using it
+Just use the script tbh
+```sh
+curl -L https://via.ixvd.net/sh | sh
+```

crates/00-system/crate.debian.sh

@@ -0,0 +1,5 @@
+super_apply() {
+    apt update -y
+    apt install -y netselect-apt sudo
+    netselect-apt
+}

crates/00-system/crate.sh

@@ -4,5 +4,8 @@ describe="Install stuff on the system!"
 scripts="@distro @self"
 
 super_apply() {
-    cp files/sudoers /etc/sudoers
+    if [ -f /usr/lib/security/pam_wheel.so ] && ! grep -q "# pam_wheel.so added" /etc/pam.d/su; then
+        echo "auth           sufficient      pam_wheel.so trust use_uid" > /etc/pam.d/su
+        echo "# pam_wheel.so added" > /etc/pam.d/su
+    fi
 }

crates/00-system/files/sudoers

@@ -1,4 +0,0 @@
-root ALL=(ALL:ALL) ALL
-%wheel ALL=(ALL:ALL) ALL
-%root ALL=(ALL:ALL) NOPASSWD: ALL
-@includedir /etc/sudoers.d

crates/01-ssh/crate.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+describe="setup ssh"
+
+apply() { 
+    [ -e "$HOME/.ssh/authorized_keys" ] || ln files/authorized_keys $HOME/.ssh/authorized_keys
+    if ! [ -f "$HOME/.ssh/id_rsa" ]; then
+        echo "Creating new ssh key for this device..."
+        ssh-keygen -f $HOME/.ssh/id_rsa -p "" -q
+        echo "Adding key to authorized_keys..."
+        cat $HOME/.ssh/id_rsa.pub > $HOME/.ssh/authorized_keys
+    fi
+}
+
+undo() {
+    echo "Undoing ssh keys is not supported, please do this manually."
+}

crates/01-ssh/files/authorized_keys

@@ -0,0 +1 @@
+ssh-rsa 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 strix@ryuk

crates/05-i3/crate.arch.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-pkgs="i3 i3lock i3status libpulse brightnessctl xss-lock dex maim dmenu gnome-keyring"
+pkgs="i3 i3lock i3status libpulse brightnessctl xss-lock dex maim dmenu gnome-keyring feh picom"
 
 super_apply() {
     pacman -S --needed --noconfirm $pkgs

crates/05-i3/crate.sh

@@ -8,6 +8,7 @@ apply() {
     [ -d "$HOME/.config/i3status" ] || mkdir -p $HOME/.config/i3status
     [ -e "$HOME/.config/i3/config" ] || ln files/config $HOME/.config/i3/config
     [ -e "$HOME/.config/i3status/config" ] || ln files/status_config $HOME/.config/i3status/config
+    [ -e "$HOME/.config/picom.conf" ] || ln files/picom.conf $HOME/.config/picom.conf
 }
 
 undo() {
@@ -16,6 +17,7 @@ undo() {
 }
 
 super_apply() {
+    [ -d "/etc/X11/xorg.conf.d" ] || mkdir -p /etc/X11/xorg.conf.d/
     cp files/40-proper-touchpad.conf /etc/X11/xorg.conf.d/40-proper-touchpad.conf
 }
 

crates/05-i3/crate.void.sh

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+pkgs="i3 i3lock i3status pulseaudio-devel brightnessctl xss-lock dex maim dmenu gnome-keyring feh picom"
+
+super_apply() {
+    xbps-install -y $pkgs
+}
+
+super_undo() {
+    xbps-remove -y $pkgs
+}
+

crates/05-i3/files/config

@@ -1,6 +1,7 @@
-######################
+#######################
 ## Raine's i3 config ##
-## Sept 2, 2023      ##
+## Mar 22, 2023      ##
+## mutation: 1m      ##
 #######################
 
 ## Mostly similar to i3's config yet differs
@@ -13,21 +14,26 @@ set $screen_lock i3lock -c "#111111" --nofork
 set $appmenu i3-dmenu-desktop
 
 set $screenshot maim -s | xclip -selection clipboard -t image/png
-set $alt_screenshot maim ~/Pictures/Screenshots/$(date +%s).png
 
-set $mod Mod4
-set $alt Mod1
 set $font pango:monospace 8
 
 # Startup Applications:
 # Things that will startup when starting i3.
 # ---
-exec --no-startup-id xrandr --output DP-2-1 --left-of DP-1-1
-exec --no-startup-id sh .scripts/clock-in.sh
-exec --no-startup-id dex --autostart --environment i3
-exec --no-startup-id nm-applet
-exec --no-startup-id xss-lock --transfer-sleep-lock -- $screen_lock 
-exec --no-startup-id gnome-keyring-daemon --start --components=ssh,secrets,pkcs11
+exec_always --no-startup-id dex --autostart --environment i3
+exec_always --no-startup-id nm-applet
+exec_always --no-startup-id xss-lock --transfer-sleep-lock -- $screen_lock 
+exec_always --no-startup-id gnome-keyring-daemon --start --components=ssh,secrets,pkcs11
+exec_always --no-startup-id feh --bg-fill ~/Pictures/wallpaper.jpg
+exec_always --no-startup-id picom
+
+# Gaps & Borders:
+# ---
+gaps inner 10
+smart_gaps on
+
+default_border pixel 1
+hide_edge_borders smart_no_gaps
 
 # Extra variables:
 # Only need changing for very specific installations.
@@ -40,27 +46,16 @@ set $audio_mute_mic XF86AudioMicMute
 set $brightness_up XF86MonBrightnessUp
 set $brightness_down XF86MonBrightnessDown
 
-set $nav_up l
-set $nav_down k
-set $nav_left j
-set $nav_right semicolon
-
 set $ws_1 "1:main"
 set $ws_2 "2:term"
-set $ws_3 "3:browser"
+set $ws_3 "3:docs"
 set $ws_4 "4:mail"
-set $ws_5 "5:notes"
+set $ws_5 "5"
 set $ws_6 "6"
 set $ws_7 "7"
 set $ws_8 "8"
-set $ws_9 "9:background"
-set $ws_10 "10:multimedia"
-
-set $mode_resize_combo Mod4+r
-set $mode_session_combo Mod4+Delete
-set $mode_keybind_combo Mod4+Insert
-
-set $op_floating_modifier Mod1
+set $ws_9 "9:bg"
+set $ws_10 "10:misc"
 
 set $meta_refresh_statusbar killall -SIGUSR1 i3status
 bar {
@@ -70,47 +65,38 @@ bar {
 
 # END OF CONFIG
 
+set $mod Mod4
+set $alt Mod1
+
 # Customization
-#! Customization
-# class                 border  backgr. text    indicator child_border
-client.focused          #D991BA #D27099 #ffffff #D96FBA   #D951B0
-client.focused_inactive #333333 #5f676a #ffffff #484e50   #5f676a
-client.unfocused        #333333 #222222 #888888 #292d2e   #222222
-client.urgent           #EF2929 #900000 #ffffff #900000   #900000
-client.placeholder      #000000 #0c0c0c #ffffff #000000   #0c0c0c
-client.background       #888A85
+
+# class                   border  backgr. text    indic.   child_border
+client.focused            #81A1C1 #81A1C1 #ffffff #D8DEE9
+client.focused_inactive   #2E3440 #2E3440 #88C0D0 #454948
+client.unfocused          #2E3440 #2E3440 #88C0D0 #454948
+client.urgent             #D08770 #3B4252 #ffffff #268BD2
+client.placeholder        #000000 #0c0c0c #ffffff #000000
+client.background         #3B4252
 
 # Generic
-floating_modifier $op_floating_modifier
+floating_modifier $mod
 tiling_drag modifier titlebar
 font $font
 
-workspace $ws_1 output DP-2-1
-workspace $ws_2 output DP-2-1
-workspace $ws_3 output DP-1-1
-workspace $ws_4 output DP-1-1
-workspace $ws_5 output DP-2-1
-workspace $ws_6 output DP-2-1
-workspace $ws_7 output DP-1-1
-workspace $ws_8 output DP-1-1
-workspace $ws_9 output DP-2-1
-workspace $ws_10 output DP-2-1
-
 # Open a terminal
 bindsym $mod+Return exec $terminal
 
 # Kill current window
-bindsym $alt+Shift+q kill
+bindsym $mod+$alt+q kill
 
 # Open app menu
-bindsym $mod+Shift+d exec --no-startup-id $appmenu 
+bindsym $mod+d exec --no-startup-id $appmenu 
 
 # Lock screen
 bindsym $mod+l exec --no-startup-id $screen_lock
 
 # Screenshots
-bindsym Print exec $screenshot
-bindsym Mod1+Print exec $alt_screenshot
+bindsym Print exec --no-startup-id $screenshot
 
 # Audio
 bindsym $audio_volume_up exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $meta_refresh_statusbar
@@ -123,43 +109,35 @@ bindsym $brightness_up exec --no-startup-id brightnessctl set +5% && $meta_refre
 bindsym $brightness_down exec --no-startup-id brightnessctl set 5%- && $meta_refresh_statusbar
 
 # Change focused window
-bindsym $alt+$nav_up focus up
-bindsym $alt+$nav_down focus down
-bindsym $alt+$nav_left focus left
-bindsym $alt+$nav_right focus right
-bindsym $alt+Up focus up
-bindsym $alt+Down focus down
-bindsym $alt+Left focus left
-bindsym $alt+Right focus right
+bindsym $mod+Up focus up
+bindsym $mod+Down focus down
+bindsym $mod+Left focus left
+bindsym $mod+Right focus right
 
 # Move focused window
-bindsym $alt+Shift+Up move up
-bindsym $alt+Shift+Down move down
-bindsym $alt+Shift+Left move left
-bindsym $alt+Shift+Right move right
-bindsym $alt+Shift+$nav_up move up
-bindsym $alt+Shift+$nav_down move down
-bindsym $alt+Shift+$nav_left move left
-bindsym $alt+Shift+$nav_right move right
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Right move right
 
 # Splits
-bindsym $alt+h split h
-bindsym $alt+v split v
-
-# Make current window fullscreen
-bindsym $alt+f fullscreen toggle
+bindsym $mod+Shift+h split h
+bindsym $mod+Shift+v split v
 
 # Change container layout
-bindsym $mod+Mod1+s layout stacking
-bindsym $mod+Mod1+t layout tabbed
-bindsym $mod+Mod1+e layout toggle split
+bindsym $mod+Shift+s layout stacking
+bindsym $mod+Shift+t layout tabbed
+bindsym $mod+Shift+d layout toggle split
+
+# Make current window fullscreen
+bindsym $mod+Shift+f fullscreen toggle
 
 # Floating stuff
 bindsym $mod+space focus mode_toggle
-bindsym $alt+space floating toggle
+bindsym $mod+Shift+space floating toggle
 
 # Scratchpad
-bindsym $alt+minus move scratchpad
+bindsym $mod+Shift+minus move scratchpad
 bindsym $mod+minus scratchpad show
 
 # Switch to workspace
@@ -186,22 +164,20 @@ bindsym $mod+Shift+8 move container to workspace $ws_8
 bindsym $mod+Shift+9 move container to workspace $ws_9
 bindsym $mod+Shift+0 move container to workspace $ws_10
 
-# Move to workspace next to current
-bindsym $mod+$nav_left workspace prev
-bindsym $mod+$nav_right workspace next
-bindsym $mod+Left workspace prev
-bindsym $mod+Right workspace next
+# Move through workspaces
+bindsym $mod+$alt+Left workspace prev
+bindsym $mod+$alt+Right workspace next
 
 # WM stuff
 # reload i3 config
-bindsym $mod+Control+c reload
+bindsym $mod+$alt+c reload
 # restart i3
-bindsym $mod+Control+r restart
-# exit i3 (recognized combo; for people who need to exit your session)
+bindsym $mod+$alt+r restart
+# exit i3
 bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'Exit i3?' -B 'Yes, exit i3' 'i3-msg exit'"
 
 # Modes
-bindsym $mode_resize_combo mode resize
+bindsym $mod+r mode resize
 mode "resize" {
     bindsym $nav_left   resize shrink width 10 px or 10 ppt
     bindsym $nav_down   resize grow height 10 px or 10 ppt
@@ -214,23 +190,17 @@ mode "resize" {
 
     bindsym Return mode "default"
     bindsym Escape mode "default"
-    bindsym $mode_resize_combo mode "default"
+    bindsym $mod+r mode "default"
 }
 
-bindsym $mode_session_combo mode session
+bindsym $mod+s mode "session"
 mode "session" {
-    bindsym l exec --no-startup-id $screen_lock, mode "default"
+    bindsym l exec --no-startup-id $lock, mode "default"
     bindsym e exec --no-startup-id i3-msg exit, mode "default"
     bindsym Shift+r exec --no-startup-id systemctl reboot, mode "default"
-    bindsym Shift+h exec --no-startup-id systemctl hibernate, mode "default"
     bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default"
 
     bindsym Return mode "default"
     bindsym Escape mode "default"
-    bindsym $mode_session_combo mode "default"
-}
-
-bindsym $mode_keybind_combo mode kbmode
-mode "kbmode" {
-	bindsym $mode_keybind_combo mode "default"
+    bindsym $mod+s mode "default"
 }

crates/05-i3/files/picom.conf

@@ -0,0 +1,9 @@
+inactive-opacity = 0.75;
+
+blur: {
+  method = "box";
+  size = 10;
+  background = false;
+  background-frame = false;
+  background-fixed = false;
+}

crates/05-i3/files/status_config

@@ -5,16 +5,16 @@ general {
 }
 
 order += "ipv6"
-order += "ethernet eno1"
+order += "wireless wlp58s0"
 order += "battery 0"
 order += "disk /"
 order += "memory"
 order += "load"
 order += "tztime local"
 
-ethernet eno1 {
-        format_up = "E: %ip (%speed)"
-        format_down = "E: down"
+wireless wlp58s0 {
+        format_up = "W: (%quality at %essid, %bitrate) %ip"
+        format_down = "W: down"
 }
 
 battery 0 {

crates/10-zsh/crate.arch.sh

@@ -1,5 +1,5 @@
 super_apply() {
-    pacman -S --needed --noconfirm zsh cmake
+    pacman -S --needed --noconfirm zsh
 }
 
 super_undo() {

crates/10-zsh/crate.debian.sh

@@ -0,0 +1,7 @@
+super_apply() {
+    apt install -y zsh
+}
+
+super_undo() {
+    pacman -R --noconfirm zsh
+}

crates/10-zsh/crate.sh

@@ -4,17 +4,6 @@ describe="Install zsh and oh-my-zsh!"
 scripts="@distro @self"
 
 super_apply() {
-    [ -d /tmp/fastfetch ] || git clone https://github.com/LinusDierheimer/fastfetch /tmp/fastfetch
-
-    if ! command -v fastfetch &> /dev/null; then
-        cd /tmp/fastfetch
-        mkdir -p build
-        cd build 
-        cmake ..
-        cmake --build . --target fastfetch
-        mv fastfetch /usr/local/bin/fastfetch
-    fi
-
     usermod $USER --shell /bin/zsh
 }
 
@@ -32,7 +21,7 @@ apply() {
         [ -d "$PL_DIR" ] || git clone https://github.com/zsh-users/zsh-syntax-highlighting.git $PL_DIR
     fi
 
-    unlink $HOME/.zshrc
+    [ -f "$HOME/.zshrc" ] && unlink $HOME/.zshrc
     [ -e "$HOME/.zshrc" ] || ln files/.zshrc $HOME/.zshrc
 }
 

crates/10-zsh/crate.void.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+super_apply() {
+    xbps-install -y zsh
+}
+
+super_undo() {
+    xbps-remove -y zsh
+}
+

crates/10-zsh/files/.zshrc

@@ -1,22 +1,53 @@
+#!/bin/zsh
+
+# Raine's .zshrc
+
+if [ "$PROFILEINC" = "1" ]; then
+	. ~/.profile
+fi
+
+export EDITOR=vim
 export GPG_TTY=$(tty)
+export PATH="$PATH:$HOME/.yarn/bin:$HOME/.config/yarn/global/node_modules/.bin:$HOME/.local/bin"
 
-# paths
-export PATH="$HOME/.yarn/bin:$HOME/.config/yarn/global/node_modules/.bin:$PATH"
+# oh-my-zsh init
+if [ -f "$HOME/.oh-my-zsh/oh-my-zsh.sh" ]; then
+    export ZSH="$HOME/.oh-my-zsh"
+    ZSH_THEME="afowler"
+    plugins=(git docker docker-compose node zsh-autosuggestions zsh-syntax-highlighting zsh-cargo-completion)
+    source $ZSH/oh-my-zsh.sh
+else
+	echo "oh-my-zsh not detected :("
+    PS1="$(whoami)@${HOSTNAME:-$(hostname)} $ " 
+fi
 
-# ZSH
-export ZSH="$HOME/.oh-my-zsh"
+update_dotfiles() {
+    cd $HOME/.dotfiles
+    git pull
+    cd - &> /dev/null
+}
 
-ZSH_THEME="afowler"
-plugins=(git docker docker-compose node zsh-autosuggestions zsh-syntax-highlighting)
-source $ZSH/oh-my-zsh.sh
+share_cdn() {
+    if ! [ -f "$1" ]; then
+        echo "file needs to exist"
+        return 1
+    fi
+    scp $1 keymaker:/usr/share/cdn/random/$2 > /dev/null
+    echo "https://cdn.ixvd.net/random/${2:-$(basename $1)}"
+}
+
+container() {
+	docker run \
+		-ti \
+		--rm \
+		--name tmp-$(id -u)-$(openssl rand -hex 8) \
+		--network ${CONTAINER_NETWORK:-internal} \
+		alpine \
+		ash
+}
+
+[ -f "$HOME/.config/i3/shortcuts-i3.sh" ] && . ~/.config/i3/shortcuts-i3.sh
 
-# ALIASES
-alias open="xdg-open"
-alias nobeep="sudo modprobe -r pcspkr"
-alias s="title $HOST && cmatrix -rs && clear"
 alias q="exit"
-
-# COSMETICS
-#fastfetch
-
-export PATH="${PATH}:/home/${USER}/.local/bin"
+alias vim="nvim"
+alias vi="nvim"

crates/20-vim/crate.arch.sh

@@ -1,5 +1,5 @@
 super_apply() {
-    pacman -S --needed --noconfirm vim
+    pacman -S --needed --noconfirm neovim
 }
 
 super_undo() {

crates/20-vim/crate.debian.sh

@@ -0,0 +1,7 @@
+super_apply() {
+    apt install -y neovim
+}
+
+super_undo() {
+    echo "we never uninstall vim -_-"
+}

crates/20-vim/crate.sh

@@ -4,11 +4,12 @@ describe="Install vim and it's stuff"
 scripts="@distro @self"
 
 apply() {
-    [ -e "$HOME/.vimrc" ] || ln files/.vimrc $HOME/.vimrc
+    [ -d "$HOME/.config/nvim" ] || mkdir -p "$HOME/.config/nvim"
+    [ -e "$HOME/.config/nvim/init.vim" ] || ln files/init.vim $HOME/.config/nvim/init.vim
     [ -e "$HOME/.ideavimrc" ] || ln files/.ideavimrc $HOME/.ideavimrc
 }
 
 undo() {
-    unlink $HOME/.vimrc
+    unlink $HOME/.config/nvim/init.vim
     unlink $HOME/.ideavimrc
 }

crates/20-vim/crate.void.sh

@@ -0,0 +1,7 @@
+super_apply() {
+    xbps-install -y neovim
+}
+
+super_undo() {
+    echo "we never uninstall vim -_-"
+}

crates/20-vim/files/.vimrc

@@ -1,2 +0,0 @@
-set number
-set relativenumber

crates/20-vim/files/init.vim

@@ -0,0 +1,27 @@
+" vim preferences
+set number
+set relativenumber
+syntax on
+
+" No arrow keys
+noremap <Up> <Nop>
+noremap <Down> <Nop>
+noremap <Left> <Nop>
+noremap <Right> <Nop>
+
+" ensure vim-plug
+let data_dir = has('nvim') ? stdpath('data') . '/site' : '~/.vim'
+if empty(glob(data_dir . '/autoload/plug.vim'))
+  silent execute '!curl -fLo '.data_dir.'/autoload/plug.vim --create-dirs  https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim'
+  autocmd VimEnter * PlugInstall --sync | source $MYVIMRC
+endif
+
+call plug#begin()
+
+Plug 'ThePrimeagen/vim-be-good'
+Plug 'machakann/vim-highlightedyank'
+Plug 'tpope/vim-commentary'
+Plug 'wellle/targets.vim'
+Plug 'vim-scripts/loremipsum'
+
+call plug#end()

crates/30-alacritty/crate.void.sh

@@ -0,0 +1,7 @@
+super_apply() {
+    xbps-install -y alacritty
+}
+
+super_undo() {
+    xbps-remove -y alacritty
+}

crates/40-git/crate.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+describe="Setup git"
+scripts="@distro @self"
+
+apply() {
+    git config --global user.name Strix
+    git config --global user.email strix@saluco.nl
+}

dot

@@ -3,7 +3,7 @@
 ask=0
 
 is_function() {
-    type "$1" 2> /dev/null | sed "s/$1//" | grep -qwi function
+    type "$1" 2>/dev/null | sed "s/$1//" | grep -qwi function
 }
 
 curr_distro() {
@@ -19,33 +19,24 @@ include() {
 func() {
     if is_function $(echo "super_$2"); then
         [ "${DO_SUDO:-yes}" = "yes" ] || return 0
-        sudo sh -c ". $1 && super_$2"
+        ecmd=". $1 && super_$2"
+        [ "$(id -u)" = "0" ] && sh -c "$ecmd" || sudo sh -c "$ecmd"
+        unset ecmd
     fi
     is_function $2 && $2
 }
 
-get_command() {
-    case $1 in
-        a*)
-            printf "apply"
-        ;;
-        u*)
-            printf "undo"
-        ;;
-        *) 
-            echo "err: not supported" >&2
-            exit 1
-        ;;
-    esac
-}
-
 # only run this *in crate dir*
 run_crate() {
+    enabled=1
     include ./crate.sh || exit 1
     if [ -n "$describe" ]; then
         echo "desc($(basename $PWD)): $describe"
     fi
-    cmd=$(get_command $1)
+    if [ $enabled -ne 1 ]; then
+        return
+    fi
+    cmd=$1
     scripts=${scripts:-"@self @distro"}
     for s in $scripts; do
         echo "exec($(basename $PWD)): $s/$cmd"
@@ -69,18 +60,30 @@ run_crate() {
     done
 }
 
-if [ $# -eq 2 ]; then
-    [ -d crates/*$1 ] || exit 1
-    cd crates/*$1
-    run_crate $2
-    cd ../..
+echo "# details:"
+echo "# user: $USER (${UID:-$(id -u)})"
+echo "# groups: $(groups)"
+echo "# distro: $(curr_distro)"
+
+cmd=$1
+if [ -z "$cmd" ]; then
+    echo "usage: $0 <command> [...args]"
+    exit 1
 else
-    [ $# -eq 0 ] && exit 2
-    for crate in $(find ./crates -mindepth 1 -maxdepth 1 -type d | sort); do
-        cd $crate
-        run_crate $1
-        cd ../..
-    done
+    shift
 fi
 
-    
+for c in ${@:-$(ls crates)}; do
+    [ -d crates/*$c ] || exit 1
+    cd crates/*$c
+    case $cmd in
+    a | apply)
+        run_crate apply
+        ;;
+    u | undo)
+        run_crate undo
+        ;;
+    *) exit 1 ;;
+    esac
+    cd ../..
+done

remote_script.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# this script is meant to be ran when .dotfiles is not present.
+# 
+# example:
+# curl https://git.saluco.nl/strix/dotfiles/raw/branch/main/remote_script.sh | sh
+
+set -e
+
+HOME=${HOME:-/home/${USER:-$(whomai)}}
+
+[ -d "$HOME/.dotfiles" ] || git clone https://git.saluco.nl/strix/dotfiles $HOME/.dotfiles
+cd $HOME/.dotfiles
+./dot a

scripts/void.d/update-discord.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+set -e
+
+echo "Downloading newest package..."
+curl -Lo /tmp/discord.deb "https://discord.com/api/download?platform=linux&format=deb"
+cd /tmp
+echo "Extracting package..."
+xdeb discord.deb
+echo "Installing package..."
+sudo xbps-install -R /tmp/binpkgs discord
+rm -rf /tmp/binpkgs
+cd -